Product Range
Wood-based panels, door core materials, flooring and finishing profiles for furniture, joinery and interior projects. All products are supplied from established manufacturers and tested to the relevant EN standards. Technical data sheets and test reports are provided with each offer.
MDF Panels
Medium density fibreboard for furniture, joinery and interior applications, in standard, moisture-resistant and fire-retardant grades.
Grades
Standard MDF — furniture, shelving and general joinery
Moisture-resistant MDF (MR) — kitchens, bathrooms and humid interiors
Fire-retardant MDF (FR) — interiors with reaction-to-fire requirements
Specification
Thicknesses up to 36 mm
E1 formaldehyde class (≤ 8 mg/100 g, EN 120)
Tested to EN 310, EN 317, EN 319, EN 322 and EN 323
Suitable finishes
Melamine film and HPL laminate
Veneer and foil wrapping
Lacquer and paint systems
Routing and 3D-machined fronts
Density, swelling and bond values vary by thickness. Tell us the thickness and end use, and we will send the matching technical sheet with the offer.
Melamine-Faced MDF
Decorative MDF panels faced on both sides with melamine-impregnated paper, ready for cutting and edging.
Decors
Plain colours, from white and cream to anthracite, marine blue and terracotta
Woodgrains: oak, walnut, pine, teak and bamboo effects
Stone and concrete effects
Surfaces
Smooth matt
High gloss
Fine textured
Woodgrain embossed
Applications
Kitchen and bathroom cabinets
Wardrobes and bedroom furniture
Office and retail furniture
Wall cladding and interior joinery
Printed and on-screen colours differ from the real board. Decor samples are sent before order confirmation.
Primed MDF for Lacquer
MDF supplied with a factory-applied primer surface, designed for lacquered furniture and door production.
Benefits on the lacquer line
Lower primer consumption compared with raw MDF
Thinner single-coat coverage and shorter drying times
Repeated sanding steps eliminated
Compatible with common paint systems
Face and back options
Primed / primed
Primed / white melamine
Primed / white gloss melamine
Primed / raw
Formats
Thicknesses from 8 to 30 mm
Sheet sizes 1830 × 3660 mm, 2100 × 2800 mm and 2100 × 3660 mm
Thickness tolerance ±0.2 mm
Savings depend on your application method. Sample boards can be provided for a line trial before the first order.
Tubular Chipboard & Door Cores
Lightweight extruded chipboard with continuous tubular holes, used as the core of interior doors and as a light, rigid panel for partitions and furniture.
Board types
Tubular chipboard, standard grade
Tubular chipboard, fire-retardant grade (35 mm)
Solid extruded chipboard
Lightweight load-carrier panels for pallet bases and modular systems
Formats
Thicknesses 28, 30, 33, 35, 38, 60 and 70 mm
1250 mm wide with holes along the length, in 2050, 2100 and 2150 mm lengths
2090 mm wide with holes across the width, cut to 600–2800 mm
Hole diameters from 18 to 25 mm, depending on thickness
Cut-to-size on request
Performance
Produced to EN 14755, for non-load-bearing use in dry conditions
E1 formaldehyde class (≤ 8 mg/100 g, EN 120)
Thickness swelling after 24 hours ≤ 20% (EN 317)
Impact resistance, sound damping and dimensional stability at low weight
The fire-retardant grade is tested for reaction to fire under EN 13501-1. The test report is provided on request. Final fire rating depends on the complete door assembly.
Laminate Flooring
Laminate flooring on a high density fibreboard (HDF) core for residential and commercial interiors.
Range
8 mm, 193 × 1200 mm — AC3 / Class 31 and AC4 / Class 32
10 mm, 191 × 1200 mm — AC4 / Class 32
12 mm, 191 × 1200 mm — AC5 / Class 33
Design
Oak and chestnut decors, light to dark tones
Register-embossed and deep register-embossed surfaces
V-groove edges
Performance
Tested to EN 13329
Suitable for underfloor heating
Resistant to scratches, stains, UV light, cigarette burns and castor chairs
Accessories
Matching skirting, 60 and 80 mm foil-wrapped
80 and 100 mm polymer-based skirting in white and grey
Packs, pallet quantities and container loading are confirmed per order.
Skirting & Profiles
Finishing profiles for floors, walls and ceilings that complete a flooring or fit-out package.
Skirting boards
Foil-wrapped MDF skirting
White lacquered spruce and pine skirting
White foam skirting, water-resistant, for vinyl and LVT floors
Plaster-flush aluminium skirting
Renovation skirting that can be cut to three heights
Fixing systems
Clip fixing systems for wood, MDF and plastic profiles
Fixing tracks with cable channels
Profiles and lighting
Flooring transition and end profiles
Worktop wall connection profiles with sealing lips
LED skirting profiles and LED ceiling profiles
Stair handrail systems in beech and oak
Profiles can be matched to your flooring colour and height. Send the floor type and decor, and we will propose matching items.
Not sure which grade fits?
Send us the application, thickness and quantity. We will propose the right board and send the technical sheet with the offer.
Request a Quote